Irish Network Tone Settings – For Linksys / Sipura phones and ATAs

If anyone is configuring their Linksys Sipura phone or ATAs here are the tone settings which are equivalent to those in use in Ireland on eircom digital exchanges:

These are the major tones used in Ireland, the other supplemental tones generated by the router / VoIP phone can be left in their US standard settings, as they are either not encountered on the Irish network or, are identical to the US standards. Many of the confirmation tones etc are usually voice prompts/messages on an eircom line.

Call Progress Tones for Republic of Ireland:

Dial Tone: 425@-10; 10(*/0/1)

Outside Dial Tone/Second Dial Tone: 400@-10; 10(*/0/1)

or, alternatively, for a higher pitch tone: 440@-10; 10(*/0/1)

Busy Tone: 425@-10; 10(0.5/0.5/1)

Reorder Tone: 425@-10; 10(.25/.25/1)

Ring Back Tone: 400@-19,450@-19;*(.4/.2/1+2,.4/.2/1+2,2/0/0)

MWI Dial Tone: 425@-19;2(.1/.1/1);28(*/0/1)

You can find these settings in the regional preference pane – you may need to click advanced and administrator log in.

Tags: ata, linksys, router, sip, voip